- Lasenic? ABS
- Lasenic? PS
- Lasenic? PMMA
- Lasenic? HIPS
- Lasenic? PP
- Lasenic? CPVC
- Lasenic? ABS+PC30%
- Lasenic? PVC
- Lasenic? HDPE
- Benlonate? PC+ABS30%
- Benlonate? PET
- Benlonate? PC
- Qunsail? POM Acetal
- Semolar? UHMWPE
- Recalon? PA6/PA66
- Recalon? MC Nylon
- Sufoner? PPS
- Sufoner? PEEK
- Sufoner? PEI
- Sufoner? PSU
- Sufoner? PI
- Sufoner? PAI
- Rexolite? 1422
- Turcite?X Rod
- Turcite?A Rod
Material IntroductionRecalon® PA6/PA66
?Recalon? PA6/PA66 Standard Sizes, Colors, Grades, Brands, TypesRecalon® PA6 is recognized as the most widely used and known engineering plastic in the current market. PA6 has the best performance, very tough, even at low temperatures, and high surface hardness, mechanical lower shock, and abrasion resistance. Combined with these characteristics and good insulation, and chemical properties, it has become common-level materials. It’s widely used in a variety of mechanical structures and spare parts. Compared to PA6, PA66 own the higher hardness, rigidity, better resistance to wear and heat deflection temperature. Temperature resistance from -40℃ to 110 ℃.
Recalon® PA6/66 Standard Sizes, Colors, Grades, Brands, Types
|Recalon® PA6/PA66 sheet|
|Thickness (mm)||Width × Length (mm)|
|0.3--1.5mm(in roll)||W:700mm,any length|
|2mm-5mm||700mm x 1200mm|
|6mm-10mm||600mm x 1200mm|
|15mm-100mm||1000mm x 2000mm
1100mm x 2200mm
|110mm-200mm||600mm x 1200mm|
|Recalon® PA6/66 rod|
|Diameter (mm)||Length (mm)|
|0.5mm-5mm(in roll)||Any length|
Colors include: Natural White, Black, Other Colors
Types: Rods, sheets, tubes, profiles
1.Recalon® PA6+Glass Fiber, natural
Description: For applications requiring higher compressive strength and rigidity than standard unfilled Nylon. Recalon® with glass fiber PA6 is significantly strengthened by the addition of glass-fibers. The added glass provides stability & rigidity, but reduces the non-lubricated wear properties. Glass filled nylon has 200% better strength than general purpose nylon but it is highly abrasive and will abraid or gall mating surfaces. The working temperature is -40-120℃.
1. Own heat resistance, strength, stiffness than pure PA6.
2. Improved Creep resistance and good dimensional stability, and wear resistance.
3. Good electrical insulation properties
4. Good aging resistance.
5. Good mechanical damping ability
1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer.
3. Certain grades available in various colors.
♦ High strength and stiffness
♦ High impact and notch impact strength
♦ High heat deflection temperature
♦ Good at dampening
♦ Good abrasion resistance
♦ Low coefficient of friction
♦ Good chemical stability against organic solvents and fuels
♦ Excellent electrical properties, ease of printing and dyeing
♦ Food safe, noise reduction
♦ Poor dimension stability, electrical and mechanical properties may become affected by absorbing moisture or water
♦ Poor acidproof ability, can’t dye with acid or touch overmuch acid
♦ Poor lightfastness, poor endurance in pollution
♦ Fan blades, structural panels, wear pads
♦ Bearing parts, gear wheels, pump parts, parts in the automotive manufacturing
♦ Sliding rails, castors, fittings etc
Partially processed parts
Do you need machining service?
1. Professional engineering team quote for you
2. Professional machining machine customize for you
3. Prior Sample supply you to confirm quality