Material Introduction
Sufoner® PPS

?Sufoner? PPS Standard Sizes, Colors, Grades, Brands, Types
Material Introduction
Sufoner® PPS is a chemical and corrosion resistant thermoplastic material that is often used in applications involving exposure to corrosive chemicals at elevated temperatures. PPS has outstanding mechanical properties and it is resistant to hot water and steam. PPS is often used as a lower cost alternative to replace PEEK. PPS continuous temperature is 220℃. Since the glass transition temperature only 90℃, it need to pay more attention when use under high temperature and high load. 

?Sufoner® PPS Standard Sizes, Colors, Grades, Brands, Types
?Sufoner® PPS sheet
Thickness (mm) Width × Length (mm)
8mm-100mm 600mm x 1200mm
Sufoner® PPS rod
Diameter (mm) Length (mm)
8mm-150mm 1000mm
Name: polyphenylene sulfide
Colors include: Natural 
Types: Rods, Plates

Grades include: 
PPS + GF30

1. Other sizes, colors can be customized.
2. Length, width, diameter and thickness tolerances may vary by manufacturer. 
3. Certain grades available in various colors. 

  • ♦ High dielectric strength
    ♦ Resistant to hot water and steam 
    ♦Strong and stiff 
    ♦ Can be used at elevated temperatures 
    ♦Excellent wear characteristics (bearing grade) 
    ♦ Good dimensional stability 
    ♦ Low moisture absorption 
    ♦ Low thermal expansion 
    ♦Outstanding chemical resistance
Product List

Shenzhen Quanda Plastic Co., Ltd.
Add.: 13/F,Baolong Building B, Longguan West Rd.,Longhua District,Shenzhen,China.
Tel.: +86-755-28113160
Fax: +86-755-28018885
E-mail: [email protected]
E-mail: [email protected]

Online Service
? HotLine